YJ-DSL Lube Oil Refinery Machine

All Products

YJ-DSL Lube Oil Refinery Machine

This lube oil refinery machine can treat used engine oil, plastic oil, tyre oil, heavy fuel, oil sludge, lubricant oil, sulfated oil, the oil from the car repair shop, machineries, ship,water pump etc. After recycling can get diesel oil, which can be reused to generator, boiler, ship or construction machines directly,the recovery rate is more than 90%.

Approx 85-90% liquid is similar to diesel and able to meet the specification of -15# diesel.

YJ-DSL Lube Oil Refinery Machine4

Description

YJ-DSL diesel oil refinery machine can refining gasoline motor oil, diesel motor oil, all kinds of engine oil, mineral oil, synthetic oil, and other waste lubricant oil, transmission oil, hydraulic oil, gear oil and other used black lubricant oil to clean diesel oil. YJ-DSL is able to recover good quality diesel oils with a high regenerate rate more than 93%-95% and low cost, it has practically negligible pollutants for the environment.

By our 85-93% recovery, heavy fuel oil distillation for diesel oil by pyrolysis distillation could be obtained through different distillation temperature ranges. 50-160℃ is the gasoline fraction range, and 160-410℃ is the diesel fraction range. After cracking and cooling, about 2-5% of the liquid is gasoline. Approx 85-90% liquid is similar to diesel and able to meet the specification of -15# diesel. They’re able to be used as industrial or civil-use fuel, even power-driven fuel. Motor oil is from a fraction after diesel in the oil refining industry, they belong to the same petroleum family having different molecular weight, it is very feasible to produce diesel.

Technical Parameter of YJ-DSL Lube Oil Refinery Machine

Machine Parameter
Handling capacityT/D0.524510203050100
Recovery rate%<=93
Teperature ≤ 430
Working NoisedB (A)456065656570707575
Total powerKW101520225590130170260
DimensionMML5000800011001200014000250003000060000100000
W350040004500500080008000100001600022000
H600070007000700070008000800080008000

Working process of YJ-DSL Lube Oil Refinery Machine

The working process for the YJ-DSL Lube Oil Refinery Plant is to pump the waste oil into the distillation kettle, the heating system will start the stirring device. Gasoline components and water in the used oil can be distilled out when the temperature reaches to 50 ℃-100℃. When the temperature reaches 160 ℃-260℃, after efficient catalytic and cracking, the light and heavy components will convert to diesel from vapor. Finally, we filter all collected diesel oil liquid, then we can get high quality finished diesel oil.

YJ-DSL Lube Oil Refinery Machine2

Cracking process of a YJ-DSL Lube Oil Refinery Machine

  • Cracking is a petroleum refining process in which heavy-molecular weight hydrocarbons are broken up into light hydrocarbon molecules by the application of heat and pressure, with or without the use of catalysts, to derive a variety of fuel products. Cracking is one of the principal ways in which used oil is converted into useful fuels such as motor gasoline, diesel fuel and home heating oil.
  • Cracking breaks carbon-carbon bonds to turn heavier hydrocarbons into lighter ones. This can occur thermally (as occurs during the petroleum formation process beneath the earth) or through the action of a catalyst.
  • The method for Scrap Engine Oil To Standard Clean Diesel Oil Distillation Refinery Machine is cracking it into fuel. The feature for the cracking process is very safe cause the temperature setting is rigorous and the machines are stabilization. Our engineers commit to design the most reasonable and high efficient distillation system to realize the profit maximization of both parties.

Features of a YJ-DSL Lube Oil Refinery Machine

  • High recovery rate: the highest recovery rate can reach 93-95%. Gasoline 2-5%, diesel fuel 85-90%.
  • Easy operation: The YJ-DSL series machine is easy to operate, low running cost, it need only 1-2 workers to operate.
  • Rich raw material: YANGJIANG’s YJ-DSL series can recycle all kinds of used black diesel, used engine oil, used machine oil, used mineral oil and almost all industrial oil to diesel fuel. The cracked oil is able to be used as industrial or civil-use fuel, even power-driven fuel.
  • Efficient catalyst: It is normally safe and available. It can help the waste oil further catalytic cracking to ensure a higher recovery rate and good quality of oil, the output oil can be used in ships, generators, as fuel for boiler, construction machines, Agriculture machines, etc. directly.

Recycled oil report from YJ-DSL Lube Oil Refinery Machine

ItemTest standardresultStandard value
Density(15℃)ASTM D12980.84kg/l 
kinematic viscosity(40℃)ASTM D4453.36cst1.6-5.8cst
Flash point(closed cup)ASTM D9360℃≥55℃
Pour pointASTM D97-19 ℃≤ 0℃
Distillation temperature
10% pointASTM D86204      ℃ 
50%point 289      ℃≤300℃
90% point 344      ℃≤355℃
95% point 359      ℃≤365℃
Cetane indexASTM D97654.42≥45
Water contentASTM D95Trace     %vol≤Trace%vol
Sulfur contentASTM D12260.151      %wt≤0.2%wt

FAQ

Mature technologies and skillful workmanship (we control every single manufacturing process and make sure it will be done perfectly in our factory with the lowest cost with the best quality assurance). products quality guarantee and about 30 days free train (competitors can’t spend much time in your factory, stay long you will find many problems with their machine).

Catalyst will keep the recycled oil stabilization, avoiding the recycled oil oxidate and color change back to black. So the recycled oil from our machine will keep yellow at least half one year or one year.

The machine work under negative pressure, the boiling rage of the used oil is lower under high vacuum condition, if without vacuum unit, the oil will crack when temperature up to 420-450 degree( and the oil will become to diesel when the temperature is 450 degree)

The final residue is semi solid and can be processed for manufacturing asphalt, or briquette for burn, or blend with oil to make off-speck heavy fuel oil or to make greases for slow moving machines.

We will dispatch engineers go to customers work site to supervise installation and provide training about 20-40days. We also provide turnkey project for customers. We will design factory layout for customer, help establish a workshop for customers including auxiliary facilities.

YANGJIANG Machine Manufacture Co., Ltd has unique technology and rich experience in the waste oil recycling industry, the company constantly seeks development, extensively absorbs the world’s advanced oil purification technology, and is committed to research and development in the field of oil treatment.

Welcome to contact us for more details (+86 133 9980 7550 WhatsApp / WeChat 24-H service).